Nov 062015
 

An opportunity to take a career break to go travelling for the duration of our winter was too good to turn down. So the fitting of the hood had started to become quite urgent!

My intention was to put it into the care of one of the car storage companies that specialise in classic cars. Most store the cars in cocoons in a temperature controlled environment and offer additional services such as tyres shoes (something I didn’t know existed!) and to run the car periodically. Obviously all at a cost.

Numerous phone calls had been made to Suffolk & Turley in a desperate attempt to get the hood fitted before I departed. I didn’t want to pick up next year in the same position waiting for a slot to trim the hood.

With only weeks to go it became fairly obvious that it wasn’t to be. To be fair to them, the issue is that the hood required a new metal canopy as the original one had been butchered and was rusted beyond repair. The fit of the new canopy supplied by Martin Robey was so shocking, it would require extensive panel work (shaping and cutting) in order to get it to fit. Only then could they start to fit the hood.

The specialist metal work is not something they are able to provide although they farm out such work to RS Panels, who luckily are just next door. RS Panels main line of work is producing high-end, bespoke bodyshells and body panels. Unfortunately a healthy order book has ruled out being able to take on any small one off jobs like mine in the near future. So I will have to wait, most likely until the new year.

It was therefore going to become a logistics exercise while overseas, arranging transportation to and from Nuneaton, once dates were confirmed.

Numerous offers had been received to ‘look after’ the car whilst I was away. I think (hope!) mostly in jest. The lack of the hood and having to arrange transportation could become a real problem, especially if put into commercial storage. It would also be preferable to be driven rather than just turned over every couple of weeks or so …. and be relieved of the best part of £1,000 for the privilege!

It didn’t feel right to be paying for it to be bubble wrapped rather than being enjoyed. I mentioned my dilemma to John, who’d helped with putting in the IRS and resolving numerous other issues during the restoration. If he could clear out enough space in his garage and I was sure of entrusting it in his care, he might be able to re-home the cat!

A tentative plan was coming together and it was fitting John would have the first opportunity to drive it after all the help I’d received, admittedly being limited to dry days due to the lack of hood. The other advantage would be another pair of eyes to critique the restoration and suggest any improvements. Something I soon came to regret ….

A trip to its potential new home was organised, so the garage could be measured up for size and the garage clearing task assessed. Although really it was just a good excuse to take it for a spin. The deal was done …. but not before John had pointed out my shockingly poor tail pipe alignment!!

It might also be possible with his contacts to have the ignition mapping done while I was away. After the garage re-homing reccee, it was taken back to the local independent Jaguar specialist who finally got the engine running smoothly by correcting all the valve clearance shims. They had suggested putting 1,000 to 1,500 miles on the clock before doing so, which was sensible advice so I’ll leave that until next year.

I had a long list of small tasks to complete before I went travelling. The mudguards and torsion bar guards had been trial fitted but still needed refitting, one of the radius arm bolts needed nipping up as it was causing a slight knocking on acceleration and to gather all the bits and pieces for the hood.

While struggling under the car, cursing the near on impossible contortions needed to get spanners onto the bolts for the torsion bar guards/mudguards, I happened to glance up at the passenger footwell. To my horror, the whole of the front end of the sunken section had been push in by several inches. Distraught didn’t come close.

It was so near completion and, at that moment in time, in my (somewhat moist) eyes, the whole restoration ruined. I started retracing where it had been driven but it hadn’t been out of my sight and it would have been some impact to cause that much damage.

It was some time before I could even face getting back underneath to assess the damage. But when I did, something was odd. There wasn’t any hint of paint damage and the paint layer was still intact. It must have been caused by compression from below rather than an impact while driving …. and then it dawned on me. I’d visited the garage when it was in having the engine issues resolved and it had been hoisted up a couple of feet using a two post lift.

Damage to the passenger footwell Similar damage on driver’s side The only possible cause …..

They’d used the floor pans, rather than the jacking points, to raise the car. By chance I’d taken a photo for the blog while it was on the lift, which confirmed this could be the only possible cause. The pads on the lift arm must have has some dum-dum like substance on them as they had left a round shaped deposit on the now buckled floor pan.

I was mulling (read raging) over how I would tackle the garage the following morning when I noticed the driver’s footwell was similarly damaged. I was far from a happy frame of mind and it was heartbreaking after all the care and effort put in. With only a couple of days before I flew off on my travels, it had the potential to ruin that as well. Although it categorically pointed to lift damage.

I abhor confrontation but in this case I was up for giving them a piece of my mind and some! It was just as well I was able to sleep on it, anger wouldn’t solve anything, so I went to the garage with the approach that accidents happen (no matter how amateurish) but I wanted it resolved.

To give them some credit they initially put their hands up, accepted liability and agreed to do whatever was necessary to rectify the damage. So I felt reassured it could be resolved while travelling. Discussions are on-going so I won’t add anything further at this stage.

Speaking to people from the E-Type forum and Hutsons, this type of damage is apparently becoming an all too common occurrence as mechanics who are used to working on older cars are becoming harder to find. They also suggested that, even though it looks awful now, a good panel beater can reverse the damage so you’d have difficulty telling. We’ll see.

The intention has never been to have a ‘trailer queen’. I’d rather have a car that I’ve restored to the best of my abilities and then have the enjoyment of driving the car, accepting it will pick up the odd scar here and there. I just hadn’t expected major surgery so soon.

The final task was to deliver it to its ‘snug’ new home and hand over the keys so it can hopefully have a good few runs out while I’m away. Although track days are strictly off limits!!

Shocking tail pipe alignment.
Ooops – how did I miss that!
A snug fit in its new home … Hopefully it can get a few
trips out while I’m away

As the UK disappeared from view, I’ll sign off until next spring …. unless there’s progress on the hood front. Fingers crossed!

 Posted by at 10:00 pm

  3 Responses to “Re-homing the cat!”

  1. Hi Chris, I am sure you have everyones sympathy, for your floor pan horrors.
    Regards Aidan Crabtree.

  2. Hi Chris

    If it’s any comfort they did exactly the same to mine in November. My resto is being done by a specialist who shall remain nameless.

    I had the shell restored and painted by another specialist, and I was very pleased with it, Might be as good as Hutsons QED. Theoretically the same colour as yours.

    When it came to returning the bare shell to the restorer, for those vital details like engine, transmission and suspension, neither of them seemed to know how the task might be accomplished!

    Then after a couple of week I saw the progress photos of the suspension refit, with the car up on the ramp, and both my footwells were bashed in just like yours. Maybe a bit less severely, hard to be sure. I’m not even going to bother establishing who did it though, you were pretty lucky to have a photo of the vandalism actually taking place.

    Steve

    • Hi Steve,

      I did mention the damage to some people on the E-Type forum and, as both you and I have found out the hard way, it’s not the uncommon if the garages aren’t used to older cars. Even so, just common sense should be enough to know a 1mm or so panel should not be used to support even the lightest of bodyshells.

      Unfortunately I’m off travelling so it still needs to be repaired and also arrange the hood to be trimmed. Almost all the people I’ve spoken to have suggested that a good panel beater will be able to get it back so that it will be difficult to tell it has been damaged. The problem is I chose to install Koolmat which will have to be lifted and replaced.

      The quotes I’ve been getting so far are quite scary as they will need to remove all the installed Koolmat/Dynaliner as well as the pedal boxes, before being able to panel beat the floor.

      I hope yours isn’t as much of s problem to sort out!

      Chris

Leave a Reply to Chris Cancel reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)